============================DMS-SA29 BIOS Release Note============================
Project Name            : DMS-SA29                 
CPU                     : Aopllolake               
Onboard Audio SSID      : 0x8893                   
I/O Chipset             : Nuvoton NCT6106D         
Flash Part              : Winbond W25Q128FWSSIQ    
GOP                     : 10.0.1036                
VBIOS                   : 1016                     
TXE                     : 3.1.50.2222              
Update Tool             : Afudos 5.07.01           
CPU Microcode           : 1506C8/0010        
                          1506C9/002E
Aopllolake Framework RC : 1.4.1  

================================Flash Method================================
DOS Flash Utility       : AFUDOS FILENAME /p /b /n 

============================================================================
DMSSA290.44             : 01/12/2018
Checksum                : 952Bh

1. CPU microcode update to 506C9/002E. 
2. Sleep Button Support in ASL file.
3. GPIO30/31/32 set to output and GPIO33/34/35/36/37 set to input. 
4. "Main Cash Drawer Voltage" GPIO control change to output high(24V) and output low(12V).

============================================================================
DMSSA290.43             : 12/18/2017
Checksum                : 58BEh

1. Add EIP EIP369245 and EIP343716.
   Note. USB Super Speed required to set SSPE_REG, and this register is set by default when EXI (host_exi_en bit) is enabled.
         Older TXE version (< 1171) used to set EXI bit, and then USB HW has the SSPE value in super speed value.
         Newer TXE version (> 1171) does not set EXI anymore, thus, BIOS needs to take care and handle SSPE_REG.

============================================================================
DMSSA290.42             : 12/06/2017
Checksum                : FC04h

1. Update Flash Size to 16MB.
2. Update TXE version to 3.1.50.2222.

============================================================================
DMSSA290.41             : 10/05/2017
Checksum                : 6223h

1. Update USB2_PER_PORT_PP0/USB2_PER_PORT_PP4 for USB EA test.

============================================================================
DMSSA290.40             : 09/20/2017
Checksum                : 22C2h

1. DMI information update below,
Type1
SYSTEM_MANUFACTURER        : Elo Touch Solutions
SYSTEM_PRODUCT_NAME        : Elo AiO X2
SYSTEM_VERSION             : RevB
SYSTEM_SKU_NUMBER          : N/A
SYSTEM_FAMILY              : X-Series
Type2
BASE_BOARD_MANUFACTURER    : Elo Touch Solutions
BASE_BOARD_PRODUCT_NAME    : ApolloLake 
BASE_BOARD_VERSION         : A101-4
Type3
SYS_CHASSIS_MANUFACTURER_1 : Elo Touch Solutions 
