#######################################################################################################################################
#          SLATE-HS022-240315
#######################################################################################################################################
[EHL][SLATEMB] (F18) 
1. Set ACPI_OEM_REV to 0x20240313
2. Reset memory configuration back to F16 modification

[EHL][SLATEMB] (F17) 
1. Set ACPI_OEM_REV to 0x20240308
2. Revert F16 modification  
3. Set REFRESH_2X_MODE to 1- Enabled for WARM or HOT 

#######################################################################################################################################
#          SLATE-HS021-240221
#######################################################################################################################################
[EHL][SLATEMB] (F16) 
1. Set ACPI_OEM_REV to 0x20240221
2. Set DDR Speed Control [Manual]
3. Set SA GV Mid Freq [3200]
4. Set SA GV Mid Gear [Gear2]

#######################################################################################################################################
#          231212 SLATEMB-HS020
#######################################################################################################################################
[EHL][SLATEMB] (F15)
1. Set ACPI_OEM_REV to 0x20231213
2. Add AMI LogoFAIL_SA50216_Supplement patch 

[EHL][SLATEMB] (F14)
1. Set ACPI_OEM_REV to 0x20231212
2. Modify ASL code to fix Windows touch displacement issue.


#######################################################################################################################################
#          231024 SLATE-HS019
#######################################################################################################################################
[EHL][SLATEMB] (F13)
1. Set ACPI_OEM_REV to 0x20231020
2. Update PMC binary to EHL_B0_PMC_FW_154.01.10.1028_prod.bin. 

#######################################################################################################################################
#          231011 SLATE-HS018
#######################################################################################################################################
[EHL][SLATEMB] (F12)
1. Set ACPI_OEM_REV to 0x20231011
2. Modify RTC Wake help string to remove dynamic time 
3. Remove unused asl code 
4. Set VtdIgdEnable/VtdIopEnable to enabled 

#######################################################################################################################################
#          230822 SLATEMB-HS017
#######################################################################################################################################
[EHL][SLATEMB] (F11)
1. Set ACPI_OEM_REV to 0x20230821
2. Hide Namespace/Device Self test from NVME dynamic setup 
3. Hide IPV4/IPV6/VLAN dynamic setup items 
4. Hide wifi setting 
----

[EHL][SLATEMB] (F10) 
1. Set GC_MODE0 to 800x600 to get large SoftKbd layout
2. Set ACPI_OEM_REV to 0x20230811
----

[EHL][SLATEMB] (F0F) 
1. Hide TCG2 Block SID item
2. Set ACPI_OEM_REV to 0x20230809
----

[EHL][SLATEMB] (F0E) 
1. Hide some BIOS items
   a. Advanced -> Power & Performance: Hide from setup
   b. Advanced -> USB Configuration:
      - Legacy USB Support (Hide)
      - XHCI Hand-off (Hide)
      - USB Hardware delays and time-outs (Hide)
      - Mass Storage Device (Hide)
   c. Advanced -> Trusted Computing: Hide from Active PCR Banks to Device Select 
   d. Advanced -> PCH-FW Configuration: Hide ME State
   e. Chipset->System Agent (SA) Configuration->Graphics Configuration: Hide from setup
2. Set PRESERVE_PASSWORDS to 1 to preserve passwords through flashing 
3. Set ACPI_OEM_REV to 0x20230731
----

#######################################################################################################################################
#          230721 SLATEMB-HS016
#######################################################################################################################################
[EHL][SLATEMB] (F0D)
1. Fixed show yellow bang on Control Panel\Hardware and Sound\Devices and Printers
----

[EHL][SLATEMB] (F0C)
1. Add 500 ms delay before send 12V/24V command
2. Set ACPI_OEM_REV to 0x20230720
----

[EHL][SLATEMB] (F0B) 
1. Show Windows logo when booting to OS
2. Set ACPI_OEM_REV to 0x20230718
----

#######################################################################################################################################
#          230714 SLATE-HS015
#######################################################################################################################################
[EHL][SLATEMB] (F0A) 
1. Set Native ASPM to false if ERP = OFF
2. Set ACPI_OEM_REV to 0x20230714
----

[EHL][SLATEMB] (F09) 
1. Disable USB S4 Wake Capability 
2. Set ACPI_OEM_REV to 0x20230706
----

[EHL][SLATEMB] (F08) (BIOS is not released to DQV)
1. Change PROJECT_NAME from SLATEMB to SLATE
2. Set ACPI_OEM_REV to 0x20230606
----

#######################################################################################################################################
#          230426 SLATEMB-HS014       
#######################################################################################################################################
Revision: 423
Author: Aries
Date: 2023/04/26 10:57:03
Message:
[EHL][SLATEMB] (F07)
1. Fixed touch failed on Setup screen when plug-in/hotplug USBC monitor.
2. Set ACPI_OEM_REV to 0x20230426
----

#######################################################################################################################################
#          230417 SLATEMB-HS013       
#######################################################################################################################################
Revision: 415
Author: Aries
Date: 2023/04/17 10:22:32
Message:
[EHL][SLATEMB] (F06)
1. Change BIOS_VENDOR to Elo Touch Solutions Inc.
2. Modify APCI OEM REV to 0x20230417 (build date)
3. Modify APCI OEM ID to Elo
----

#######################################################################################################################################
#          230412 SLATEMB-HS012      
#######################################################################################################################################
Revision: 411
Author: Aries
Date: 2023/04/12 09:08:21
Message:
[EHL][SLATEMB] (F05)
1. Replace logo file to Elo_Master_Screen_Landscape_1920x1080.png
----
Revision: 410
Author: Aries
Date: 2023/04/11 15:01:15
Message:
[EHL][SLATEMB] (F04)
1. Change ERP string to ErP support  [ON/Off]  default ON 
2. Change logo to Screen-Graphic-Landscape-with-Elo-1920-1080.png
----
Revision: 408
Author: Aries
Date: 2023/03/31 14:21:39
Message:
[EHL][SLATEMB] (F03)
1. Set NativeAspmEnable to enabled 
2. Set PcieRootPortAspm to enabled 
3. Set PcieRootPortL1SubStates to L1.1 & L1.2
4. Set PcieRootPortPMCE to enabled 
5. Set PchDmiAspm to enabled 
6. Set EnableRenderStandby to enabled 
7. Show all C-State Item 
8. Show graphic power item 
9. Set PkgCStateLimit to C9
10. Support DP 2/4 lanes selection for Z30 Without CFD
11. Show NVME setup items 
12. Modify PD fw string 
13. Change SYSTEM_FAMILY string 

#######################################################################################################################################
#          230309 SLATEMB-HS011     
#######################################################################################################################################
Revision: 383
Author: Aries
Date: 2023/03/09 13:28:24
Message:
[EHL][SLATEMB] (F02)
1. Modify power failure function
2. Support power button lock function
----
Revision: 380
Author: Aries
Date: 2023/03/07 16:08:53
Message:
[EHL][SLATEMB] (F01)
1. BIOS won't hide AC Loss items and set power failure to bypass when enabled RTCWake 
2. Modify power failure to bypass when enter S4/S5 with RTCWake enabled
----
Revision: 378
Author: Aries
Date: 2023/03/06 17:43:00
Message:
[EHL][SLATEMB] (B0D)
1. Revert B0C RTCWake modification 
----
Revision: 376
Author: Aries
Date: 2023/03/03 11:10:51
Message:
[EHL][SLATEMB] (B0C)
1. Change RTC loss behavior to wait 5 seconds and then boot
2. Replace AX88179 PXE
3. Hide Chassis manufacture2
4. Change RTC Wake function and string 
5. Show me re-flash item


