EloPOS E2H2S2 BIOS Release Note
---------------------------------
B19A.24B
release date : 20191024
Checksum:  D214FEAD
---------------------------------
1. Change Project name to "Elo" on text mode
2. Fixed EUP Function Fail when power off in BIOS setup
3. gray out XHCI MODE for Customer Request
4. Show SMBIOS TYPE1 SYSTEM_VERSION,SYSTEM_SKU_NUMBER,SYSTEM_FAMILY in SETUP MAIN PAGE
5. Change SYSTEM_PRODUCT_NAME to EloPOS E2/S2/H2 for EloPOS SKU

##########################################################
based from WLIDS2.0 i2 B199.04A
##########################################################

---------------------------------
B199.04A
release date : 20190904
Checksum:  D20F7AA2
---------------------------------
1BFixed WLAN device will NOT detect after re-scan. The AC9260 will be only detected after the device reboot for WHQL Test
2BRemove XHCI Mode ITEM
3BRemove USB touch panel fail workaround
4BI/O hub is not connected > Restore Defaults > BIOS/USB Configuration > hidden items are appeared (need restart)
5BFixed TCG->SHA256 ITEM cannot load default

---------------------------------
B198.02A
release date : 20190802
Checksum:  D2135685
---------------------------------
X	Fixed after S3 resume touch panel cant work
X	Base on B197.26A

---------------------------------
B197.26A
release date : 20190726
Checksum:  D21598D2
---------------------------------
1.	Fixed BIOS ROM ID error
2.	Set resolution like Z3/Z5 under shell mode
3.	When unplug IO board the IO board FW need show N/A
4.	Hidden Some Item when IO board plug out
5.	Enable memory mapping 0xFE800000 for IT8855 FW update
6.	Fixed Customer Touch panel sometimes can't work under Post
7.	Remove Globe reset when after G3 is Power on mode
8.	(sync from EloPOS E2 B197.02B) Set Pre-Emphasis Level 0 and Swing Level 2 for customer cable compatibility.
9.	(sync from EloPOS E2 B195.27A) Update CPU Microcode for Intel SA-0233 Security 
---------------------------------
B195.06A
release date : 20190506
---------------------------------
o	With new WLIDS 2.0 SMBIOS name 

##########################################################
based from EloPOS E2 (B194.22A)
##########################################################

---------------------------------
FileName #1:  B197.02B (For EloPOS E2)
Checksum #1:  D216C6BC
release date : 20190702
---------------------------------
o	Set Pre-Emphasis Level 0 and Swing Level 2 for customer cable compatibility.

---------------------------------
B195.27A
release date : 20190527
---------------------------------
E	Update CPU Microcode for Intel SA-0233 Security

---------------------------------
B194.22A
release date : 20190422
---------------------------------
E	Changed Project name displayed in Logo stage "Continental Z2" -> "EloPOS E2"
E	Disable DPTF function for Customer request

---------------------------------
B194.02A
release date : 20190402
---------------------------------
E	Show IT8855 FW Version(Mainboard &Io Board) in BIOS Main page

Have in mind you need to use the latest IT8855 FW in Mainboard (T12) and IO Board (Port A T16 and Port B T13) in order to read the IT8855 FW versions.
 

---------------------------------
B193.20A
release date : 20190320
---------------------------------
1.	Change Screen Bottom Right F4: Save & Exit, The behavior should be Save Changes and Reset
2.	Modify setup string for customer request

---------------------------------
B193.14A 
release date : 20190314
---------------------------------
1.	Correct SATA speed limit typo
2.	Update SMBIOS system family string

---------------------------------
B193.08A
release date : 20190308
---------------------------------
1.	Disable multiple display during POST time
2.	Update BIOS menu

---------------------------------
B192.27A
release date : 20190227
---------------------------------
1.	Change variable preserve policy after CMOS power failure
2.	Add IO HUB USB P5/P6 Boost options
3.	Arrange USB delay setup items
4.	Arrange BIOS exit menu layout to meet vendor specification
5.	(Customer request) Modify Processor Speed and Max CPU Speed in BIOS setup to maximum turbo mode CPU speed
6.	Provide verb table switch for Windows and Linux
7.	(Customer request) Modify eDP back light minimize PWM to about 10%
 
---------------------------------
B192.15A
release date : 20190215
---------------------------------
----------------------------------------
1.	Modify eDP back light minimize PWM to about 5%
2.	Add USB hardware delays and time-outs items
3.	Modify Setup menu items
4.	Remove item "SHA384 PCR Bank"
5.	Modify Total Memory string
6.	Correct setup utility hot key help

---------------------------------
B191.11A
release date : 20190111
---------------------------------
----------------------------------------
i.	USB Type C Setting
ii.	1.8W Audio Verb Table
iii.	USB 2.0 signal strength adjustment

---------------------------------
B18C.19A
release date : 20181219
---------------------------------
----------------------------------------
i.	Modify smbios strings.
ii.	Add one more type 3 record for SYS_CHASSIS_MANUFACTURER_2.
iii.	Modify BASE_BOARD_VERSION.
iv.	Modify type 223 BoardName.
v.	Modify [F4] as save hot key in SCU
vi.	Turn off IO board USB ports power in S4/S5 state
vii.	Change platform role to desktop
viii.	Hide debug UART in OS
ix.	Correct CPU configuration parent menu

---------------------------------
Milestone    : B18B.23A
PreviousTag  : B18B.22A
----------------------------------------
Add AmiSetupNvLock for SCE password check/change
---------------------------------
Milestone    : B18B.22A
PreviousTag  : B18B.16A
----------------------------------------
Correct G sensor reading for R2 PCB
---------------------------------
Milestone    : B18B.16A
PreviousTag  : B189.03A
----------------------------------------
Modify hardware configuration for R2 PCB
1. Modify dTPM to SPI interface
2.
Modify verb table for new codec.
----------------------------------------
Modify wmiobject win32_bios version string.
----------------------------------------
Update setup menu layout for PDS 0.8
----------------------------------------
Implement EC G3 auto power on flag after AC power loss
----------------------------------------
AfuWin will hang if there is report sent from touch panel while AfuWin is
running.
----------------------------------------
Update Type C USB PhyTune
----------------------------------------
Show CPU and memory size information in non quiet boot screen.
---------------------------------
Milestone    : B189.03A
PreviousTag  : B188.03A
----------------------------------------
Increase SoftKeyboard icon size
----------------------------------------
Turn off USB power in S4 and S5 state
----------------------------------------
(20608) Fix "The system can not using touch panel wake up from S3 under Windows
        10 x64 operating system.(Build-1)"
----------------------------------------
Offer AMI Sce support
----------------------------------------
(Z2_032) Fix "After Disable then Enable the SATA port 0,the system cannot auto
         boot to HDD."
----------------------------------------
Update code base to 5.13_VEB_1AUAJ028
---------------------------------
Milestone    : B188.03A
PreviousTag  : B187.03A
----------------------------------------
Update setup menu layout
----------------------------------------
Update code base to 5.13_VEB_1AUAJ027
----------------------------------------
Implement USB ports power switch
----------------------------------------
Change hot key mapping: F9 for load default, F10 for save configuration, F11 for
Boot Device Menu
----------------------------------------
Merge Fixed Boot Option feature
----------------------------------------
(Bracey Z2_011) Fix "The S5 RTC wake Settings- wake system from S5 is not work,
                when the time is up system cannot wake from S5."
----------------------------------------
(Bracey Z2_021) Fix "The system always auto power on when The AC power loss set
                as "Last state" then let Presvious is S5 or "power off"."
----------------------------------------
(Bracey Z2_018) Fix "The system cannot wake up from S3/S4/S5 state by main board
                LAN(REALTEK RTL8111H)"
----------------------------------------
(Bracey Z2_022) Implement enable/disable LAN PXE OpROM
----------------------------------------
Change beep policy
----------------------------------------
(Bracey Z2_002) Fix "The MAC address shows N/A under BIOS Main page."
----------------------------------------
(Bracey Z2_015) Fix "There is no "Safety Remove Hardware and Eject Media" icon
                for USB 2_6 when plug in the USB device under win10x64 os."
----------------------------------------
Fix "Power button has not function in OS"
----------------------------------------
(Bracey Z2_017) Fix "The DMI rewritable function cannot work properly."
----------------------------------------
Implement SATA speed(Gen1/2/3) limit
----------------------------------------
Add soft keyboard support on BIOS setup
----------------------------------------
Add touch support on BIOS setup
----------------------------------------
Implement hardware monitor
################################################################################
Milestone    : B187.03A
PreviousTag  : N/A
################################################################################